S-01
Pool resurfacing
Old plaster is chipped out, hollow spots are repaired, and a new interior finish is troweled on over a fresh bond coat.Old plaster chipped out, hollow spots repaired, new finish over a fresh bond coat.
Pool resurfacing contractor · Coral Springs, FLPool resurfacing · Coral Springs, FL
Pool Resurfacing in Coral Springs
Rough, stained or flaking plaster gets chipped out and replaced with a new pebble, quartz or plaster finish. You get a written, fixed price before any water leaves the pool.Rough, stained or flaking plaster replaced with a new pebble, quartz or plaster finish, at a written, fixed price.
- Full chip-out and prep, not a skim coat over failing plasterFull chip-out and prep, not a skim coat
- Waterline tile, coping and deck work handled in the same jobTile, coping and deck work in the same job
- Most pools are back in use in about a week, weather permittingMost pools back in use in about a week
Call (954) 420-6848Licensed and insured in Florida · FL license #RP0067108
Get a free resurfacing estimate
Free on-site measure and estimateFree on-site estimate
Written, fixed-price quote
Licensed and insured · FL license #RP0067108
Finish samples brought to your pool
01 / Services
Pool resurfacing services in Coral Springs
One crew takes the pool from drained shell to balanced water, so the surface, tile and deck all line up.
S-02
Diamond Brite and quartz finishes
The most requested finish in Broward County. Quartz aggregate gives plaster more color, sparkle and stain resistance.Quartz aggregate for more color, sparkle and stain resistance.
S-03
Pebble and glass bead finishes
Exposed-aggregate surfaces for owners who want the longest life between resurfacings and a deeper water color.The longest life between resurfacings and a deeper water color.
S-04
Waterline tile and coping
Cracked, faded or calcium-crusted tile comes off and new tile and coping go in before the finish, so the edges meet cleanly.New tile and coping set before the finish, so the edges meet cleanly.
S-05
Pool deck resurfacing
Worn or cracked decks get a cooler, slip-resistant coating or new pavers that match the refreshed pool.Cooler, slip-resistant coatings or new pavers to match the pool.
S-06
Crack, leak and shell repair
Structural cracks, failing fittings and delaminated areas are fixed while the pool is empty, before any new surface goes on.Structural fixes made while the pool is empty, before the new surface.
02 / Finishes
Pick your pool finish
Tap a sample to compare how each one feels, looks and lasts. We bring the real samples to every estimate.
Selected · PF-01
Pebble
Small natural stones set in cement. The toughest surface we install and the best at hiding stains and everyday wear.
- Feel
- Textured and grippy
- Look
- Natural, lagoon-like depth
- Typical lifespan
- 15 to 20+ years
Worn surface
New finishLeft: plaster worn rough and stained. Right: a smooth new finish.
03 / When to resurface
Five signs your pool surface is done
- 01It feels like sandpaper. Rough plaster that scrapes feet and snags swimsuits has worn through its smooth layer.Rough plaster has worn through its smooth layer.
- 02Stains will not brush or acid-wash out.Stains will not brush out. Rust, copper and algae stains that keep coming back are in the surface, not on it.Stains that keep returning are in the surface, not on it.
- 03Dark patches are showing through.Dark patches show through. Gray or dark areas mean the finish has worn down to the concrete shell.The finish has worn down to the concrete shell.
- 04Plaster is flaking or sounds hollow.Plaster is flaking or hollow. Chips on the steps and floor point to delamination under the surface.Chips on steps and floor point to delamination.
- 05You are topping off water more often.You top off water more often. Cracks and worn fittings leak, and the fix is easiest with the pool empty.Cracks and worn fittings leak.
04 / Process
From drained shell to swim-ready, in five stepsDrained shell to swim-ready, in five steps
- Measure and quote We measure the pool, check the shell and tile, and leave a written price for each finish.On-site measure and a written price for each finish.
- Drain and chip out The pool is drained and failing plaster is removed down to a sound surface.Failing plaster removed down to a sound surface.
- Repair, tile and coping Cracks and fittings are fixed, then new waterline tile and coping are set.Cracks and fittings fixed, new tile and coping set.
- Apply the finish A bond coat goes on, then your finish is troweled and exposed in a single day.Bond coat, then your finish troweled in a single day.
- Fill and start up The pool is refilled and the water is balanced so the new surface cures properly.Refilled and balanced so the surface cures properly.
05 / Cost
What resurfacing costs in Coral Springs
Typical ranges for a backyard pool here. Your written price depends on size, prep and the finish you pick.
Marble plaster
$9,000–$15,000
Lowest cost, smoothest feel, shortest life.
Quartz / Diamond Brite
$11,000–$19,000
The middle option most owners here choose.
Pebble
$15,000–$28,000
Highest up front, longest between resurfacings.
Waterline tile
$1,800–$4,500
Added to the resurface while the pool is empty.
These are estimates for a typical residential pool, not quotes. Your own price is set after we measure and check the shell. See every line item in the Coral Springs price guide.
06 / Service areas
Resurfacing pools across Coral Springs and northwest BrowardCoral Springs and northwest Broward
Most of our work is in Coral Springs neighborhoods, with crews in the surrounding cities every week.
Coral Springs neighborhoods
- Eagle Trace
- Heron Bay
- Cypress Run
- Ramblewood
- Maplewood
- Kensington
- Turtle Run
- Wyndham Lakes
- Running Brook Hills
Nearby cities
- Parkland
- Coconut Creek
- Margate
- Tamarac
- North Lauderdale
- Sunrise
07 / In writing
What every Coral Springs quote includes
A price per finish, on paper
Plaster, quartz and pebble are each priced for your pool, so you can compare them side by side before deciding.
Prep spelled out
The quote says whether your pool gets a full chip-out or a bond coat, and what happens if hollow plaster is found once it is drained.
A start-up plan
You get the brushing and chemistry schedule for the first month, because that is when a new finish is most easily marked.
How much does pool resurfacing cost in Coral Springs?
Three things set the price: the surface area of the pool, the finish you choose, and how much prep the old surface needs. Plaster costs the least, quartz sits in the middle, and pebble and glass bead cost the most. For a typical backyard pool here, plan on roughly $9,000–$15,000 for plaster up to $15,000–$28,000 for pebble. Treat those as estimates; we measure on site and give you a written, fixed price for each option. See the full Coral Springs price guide.
How long does a resurfacing job take?
Most residential pools take about a week from drain to refill. Tile, coping or deck work adds a few days, and summer rain can push the finish day back.
Which finish lasts the longest?
Pebble and glass bead finishes typically last the longest, followed by quartz, then standard marble plaster. Water chemistry matters as much as the material, so we leave you with start-up and care instructions.
When can we swim again?
Once the pool is full and the water is balanced, which is usually a few days after the finish is applied. We tell you the exact day before we leave.
Do you replace tile and coping at the same time?
Yes. The pool is already drained, so it is the cheapest time to do it, and new finish bonds best against new tile. Deck resurfacing can be scheduled in the same visit. How deck resurfacing works.
09 / About and contact
A local crew that only works on pool surfaces
Coral Springs Pool Resurfacing is a pool finishing contractor based in Coral Springs. Resurfacing, tile, coping and decks are all we do, so the crew that measures your pool is the crew that finishes it.Coral Springs Pool Resurfacing is a pool finishing contractor based in Coral Springs. The crew that measures your pool is the crew that finishes it.
We have been an owner-run Florida corporation since 2013, and the license on every permit belongs to the same person who owns the company. Diamond Brite and Florida GEM finishes are our everyday work, along with sun shelves, spas and LED light swaps done while the pool is empty.Owner-run since 2013, with the owner holding the license on every permit.
Tell us about your pool and we will come out, measure, show you finish samples by the water, and leave a written price. More about how we work.
- Phone
- (954) 420-6848
- Estimates
- Free, on site, with finish samples
- Quotes
- Written, with a fixed price for each finish
- Service area
- Coral Springs, FL and northwest Broward County